There is no well-defined syllabus for ONGC....questions are asked from B.Tech level.

clarify u want syllabus for which all subjects?

Clarify you require coaching institute in which region?

HI Dipanjan

Kindly clarify you require coaching institute in which region...

Rajjan

B. Tech / B.E in Electronics & Communication / Electronics / Computer Science/Information Technology is preferred as eligibility for opting Mtech in VLSI..so i think u r eligible for that...however, the eligibility requirements differ for varied institutes so which ever institute u choose, ascertain its eligibility criteria first...

Engineering as a career option is finalized at a stage when the kids are not mature enough to decide. Usually, their career choice is based on the preference of their parents, and obviously those giving the advice are not engineers themselves, nor do they have the entire experience of engineering as a profession. It is quite obvious that while opting for a profession, children themselves are not aware of what engineering as a career is all about.

In the field of engineering, vision and skills know no boundaries. Students have to accept challenges as opportunities to prove themselves. For instance, being an aerospace engineer, you might get a chance of working on cryogenic technology which is highly required for the country's advancement in the space research field or being a civil engineer, you may get an opportunity to make earthquake resistant houses. Likewise, being an electrical engineer, you might have an opportunity to develop superconductors and so on.

There are students who appear for GATE, so as to open avenues for themselves, for getting admission in M.Tech. Graduate Aptitude Test in Engineering, acts as the gateway to get admission in M.Tech, M.Arch and other Masters Degree programmes. A masters Degree in Engineering offers an entire new horizon to the students, as they can opt to the path of research and development.

Rewarding profession

As a student you have to be open to all these opportunities to make way in the arena of top-class engineers. Similarly, all the streams of engineering offer so many opportunities where creativity and ingenuity act as the tools to alleviate the challenges and come out as the winner. Working as an engineer will offer job satisfaction and most importantly, the job is subjected to a lot of growth. After all, everyone has to spend a large part of life at work station and you need to deliver contentment and satisfaction so as to grow in a better way.

Engineering offers a varied array of career possibilities. From the design of fighter planes to boring holes in earth in search of petrochemicals to make way to Mars, Engineers definitely play an important role in success of human story. Working as an engineer requires intelligence and creativity which in turn requires the students to utilize their mental faculties as compared to professions where practice helps in performing the job. Engineering is about making things work, yes, it may seem to be challenging, but then it's the engineers who make it possible in an efficient and effective way.

The most commonly used amplifier in sample and hold circuits is

a) a unity gain inverting amplifier

b) a unity gain non-inverting amplifier

c) an inverting amplifier with a gain of 100

d) an inverting amplifier with a gain of 100

Generally, the gain of a transistor amplifier falls at high frequencies due to the

a) internal capacitances of the device

b) coupling capacitor at the input

c) skin effect

d) coupling capacitor at the output

At 300K, for a diode current of 1mA, a certain germanium diode requires a forward bias of 0.1435, whereas a certain silicon diode requires a forward bias of 0.718 V. Under the conditions stated above, What is the closest approximation of the ratio of reverse saturation current in germanium diode to that in silicon diode?

Under low level injection assumption, the injected minority carrier current for an extrinsic semi-conductor is essentially the:

a) diffusion current

b) drift current

c) reco,bination current

d) induced current

A Silicon PN junction at a temperature of 20⁰C has a reverse saturation current of 10 pico-Amperes (pA). The reverse saturation current at 40⁰C for the same bias is approximately:

a) 30 pA

b) 40 pA

c) 50 pA

d) 60 pA

A dynamic RAM has a memory cycle time of 64 nsec. It has to be refreshed 100 times per msec and each refresh takes 100 nsec. What percentage of the memory cycle time is used for refreshing?

Let G be a weighted undirected graph and e be an edge with maximum weight in G. SUppose there is a minimum weight spanning tree in G containing the edge e. Which of the following statements is always TRUE?

a) There exists a cutset in G having all edges of maximum weight

b) There exists a cycle in G having all edges of maximum weight

c) Edge e cannot be contained in a cycle.

d) All edges in G have the same weight

Evaluate this- (34.4)₈ X (23.4)₈

Let G be a directed graph whose vertex set is the set of numbers from 1 to 100. There is an edge from a vertex i to a vertex j iff either j = i or j = 3i. What is the minimum number of edges in a path in G from vertex 1 to vertex 100 ?

The availability of a complex software is 90%. Its mean Time between Failure  (MTBF) is 200 days. because of the critical nature of the usage, the organization deploying the software further enhances it to obtain an availability of 95%. in the process, the Mean Time To Repair (MTTR) increased by 5 days. What is the MTBF of the enhanced software?

Narayana,

Take a look on the following coaching institutes:

Prince Educational Academy- SAI DHARANI CASTLE FLAT NO.110 OPP.GOPALPATNAM POLICE STATION BAJI JUNCTION VISAKHAPATNAM
9885801397/9866867477

GATEForum (Visakhapatnam)- 92478 00090

GATEForum (Bhubaneshwar)- 168A, Sahid Nagar, Bhubaneswar,Dist.:Khurda, Orissa - 751007
0674-3254182 / 9437055010 / 9861231718

Hi Abhinav,

For GATE examination, the center is chosen by the GATE administration itself...however, for getting admission in Mechanical Engineering, there are number of colleges across the country,.....so it is important to note that u r looking for college in which region exactly. So ascertain u want admission in which all regions?                                         

Please clarify your question, r u interested in pursuing MCA through GATE? If yes, then it should be understood that GATE is not carried out for admissions in MCA....it is meant for admission in M.Tech, M.Arch and M.Pharma...

Hi Narayana

Your query is not clear....However, i would like to tell u that GATE exam is not meant for those who wanna pursue MCA.